Siemens SIMOCODE pro C System Manual page 113

● Inputs AM 1 / inputs AM2
Shows the current value at the two inputs of analog module 1 / 2 in mA.
● Max. temp. °C TM 1 / TM2
Shows the maximum temperature of all used sensor measuring circuits of the temperature
module 1 / 2 in °C.
● Temperatures °C TM 1 / TM2
Shows the individual temperatures of all used sensor measuring circuits of the temperature
module 1 / 2 in °C.
● Max. temp. °F TM 1 / TM2
Shows the maximum temperature of all used sensor measuring circuits of the temperature
module 1 / 2 in °F.
● Temperatures °F TM 1 / TM2
Shows the individual temperatures of all used sensor measuring circuits of the temperature
module 1 / 2 in °F.
● UL1-N, UL2-N, UL3-N
Shows all phase voltages in V.
● UL1-L1, UL2-L3, UL3-L1
Shows line-to-line voltages UL1-L2, UL2-L3, UL3-L1 in V.
● Imax, UL1-N, Cos phi
Shows the maximum current of all three phases in amps, the phase voltage UL1-N in V, and
the power factor as absolute values.
● Imax, UL1-L2, Cos phi
Shows the maximum current of all three phases in A, the line-to-line voltage UL1-L2 in V and
the power factor.
● Imax, UL1-N, °C
Shows the maximum current of all three phases in amps, the phase voltage UL1-N in V, and
the maximum temperature of all used sensor measuring circuits of the temperature module
in °C.
● Imax, UL1-L2, °F
Shows the maximum current of all three phases in A, the line-to-line voltage UL1-L2 in V,
and the maximum temperature of all used sensor measuring circuits of the temperature
module in °F.
● Calculator 1
Shows the calculated result that the function block Calculator 1 provides without units in the
range 0 ... 65535.
Permits display, for example, of a 2-byte value sent directly from the automation system on
the display of the switchboard or the display without units of each 2-byte value in
SIMOCODE pro.
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
[mA]
5)
6)
6)
6)
6)
3)
4)
3)
4)
7)
7)
Description of system components
8.3 Operator panel with display
113