Display Of Statistical And Maintenance-Relevant Information On The Statistics/Maintenance Display - Siemens SIMOCODE pro C System Manual

8.3.3.6 Display of statistical and maintenance-relevant information on the
statistics/maintenance display
The "Statistics/Maintenance" menu item gives an overview of all SIMOCODE pro information
that is primarily relevant to maintenance. The states of timers and counters, etc. are
displayed, as well as operating hours, stop times and the number of starts.
These are the most important menus by way of example:
General
● Number of overload trips
● Motor operating hours
● Motor operating hours >: Displays overshooting of the set limit for operating hours
monitoring.
● No. of starts - actual value
● Permissible starts - actual value
● One more start only, no start
● Stop time: Displays overshooting of the set limit for motor stop time monitoring.
● Energy consumed (possible only if a current / voltage measuring module is used)
● Number of parameterizations
● Motor operating hours basic unit
● Real time basic unit
● Timer
● Timer 1 (2, 3, 4, 5, 6) actual value
● Timer 1 (2, 3, 4, 5, 6) output
● Counter
● Counter 1 (2, 3, 4, 5, 6) actual value
● Counter 1 (2, 3, 4, 5, 6) output
Calculators
● Calculator 1
● Calculator 2
● Calculator 3
● Calculator 4
Safety
● Time until test requirement: Remaining time until next test requirement in weeks
(displayed only when DM-F is installed).
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Description of system components
8.3 Operator panel with display
119