Siemens SIMOCODE pro C System Manual page 358

Technical data
15.7 Technical data of the multifunction module
Technical data of the multifunction module
DC-13
Ground-fault module function
Connectable 3UL23 residual
current transformer - feed-
through diameter
Type of current to be monitored AC and pulsating DC (type A)
Measurable line frequency
Response value current
(settable)
Measuring accuracy (relative)
ground-fault module
Measuring accuracy (relative)
transformer 3UL23
Reaction time (maximal)
Temperature module function
Sensor circuit
Versions of the cable shielding
for the sensor circuit
Versions of the cable shielding
for the sensor circuit
Conversion time
Type of connection
Typical sensor circuit
PT100
•
PT1000 / KTY83 / KTY84 /
•
NTC
Measuring range open circuit
detection / short-circuit
detection
PT100 / PT1000
•
KTY83-110
•
KTY84
•
NTC
•
Measuring accuracy at an
ambient temperature of
20 °C (T20)
Deviation due to ambient
temperature
(as % of measured value)
Isolation of the inputs from the
device electronics
358
2 A / 24 V DC;
0.55 A / 60 V DC;
0.25 A / 125 V DC
35 mm to 210 mm
16 Hz to 400 Hz
0.03 A to 40 A
±5 %
±2.5 %
100 ms
Up to 30 m, cable shielding recommended
•
From 30 m, cable shielding necessary
•
500 ms
2-wire or 3-wire connection
1 mA (typical)
0.2 mA (typical)
-50 °C ... +500 °C (open circuit, short circuit)
-50 °C to +175 °C (open circuit, short circuit)
-40 °C to +300 °C (open circuit, short circuit)
+80 °C to +160 °C (short circuit)
< ±2 K, ±1 digit
0.05 per K deviation from T20
No
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro