Siemens SIMOCODE pro C System Manual page 222

Mounting, wiring, connecting, system interfaces, configuration guidelines
12.2 Wiring, connecting
Terminal assignment for digital module DM-F Local
The following table shows the pin assignment of the removable terminals:
Table 12- 18 Terminal assignment of the removable terminals of the digital module DM-F Local,
Terminal
Upper terminals
Lower terminals
1)
Note
Connect SIMOCODE pro via terminal SPE with the maximum possible cross-section and
with as short a cable as possible to the functional ground of the control cabinet,
e.g. to the grounded mounting plate of the control cabinet.
222
24 V DC version and 110 to 240 V UC version.
Assignment
60, 66 Digital module, relay outputs 1 (60) and 2 (66)
61, 67 Relay enabling circuit 1, NO
62, 68 Relay enabling circuit 2, NO
Y12, Y22 Sensor input channel 1, channel 2
T1, T2 Supply for sensor inputs (24 V DC, pulsed)
Y33 Start button (start after rising and falling edge)
Y34 Feedback circuit
A1 (+) Power supply connection 110 to 240 V AC/DC or
+24 V DC
A2 (-) N or -24 V
M Ground (reference potential for sensor inputs,
3UF7320-1AU00-0 only)
1 Cascading input
T3 Supply for sensor inputs (24 V DC, static)
SPE System shielding
1)
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro