Siemens SIMOCODE pro C System Manual page 350

Technical data
15.6 Technical data of the expansion modules
Technical data of the DM-F Local digital module
"6"
"7"
"8"
DIP switch
"SET / RESET" button
Inputs with safety relay
function
Cable length (single)
Input characteristic
350
Flickering yellow Configuration error
OFF Cascading input 1, automatic start
Yellow Cascading input 1, monitored start
Flashing yellow Configuration mode waiting for confirmation
Flickering yellow Configuration error
OFF With startup testing
Yellow Without startup testing
Flashing yellow Configuration mode waiting for confirmation
Flickering yellow Configuration error
OFF Automatic starting after power failure
Yellow No automatic starting after power failure
Flashing yellow Configuration mode waiting for confirmation
Flickering yellow Configuration error
for setting safety functions
Application of parameters set via DIP switch
•
Resetting of faults (also possible via "TEST/RESET" button on basic unit)
•
2 sensor inputs 24 V DC (Y12, Y22)
Supply via terminal T1 and T2 with cross-circuit detection or external supply (static
•
+24 V DC) without cross-circuit detection
Functions parameterizable via DIP switch
•
1 start signal input 24 V DC (Y33)
For monitored reconnection of the relay enabling circuits after a safety-related trip
•
Supply via terminal T1 with/without T3 (static +24 V DC) without cross-circuit detection
•
1 cascading input 24 V DC (1)
For use in connection with a higher-level safety relay
•
Supply via terminal T3 (static +24 V DC)
•
1 feedback circuit input 24 V DC (Y34)
For contactor monitoring of the motor and incoming supply contactors via series-connected
•
auxiliary switch normally-closed contacts
Supply via terminal T2 with/without T3 (static +24 V DC) without cross-circuit detection
•
1500 m
Type 2 according to EN 61131-2
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro