Siemens SIMOCODE pro C System Manual page 336

Technical data
15.2 Technical specifications of the SIMOCODE pro C / pro S / pro V PB / pro V MR basic units
Technical specifications of the SIMOCODE pro C / pro S / pro V PB / pro V MR basic units
Connection of SIMOCODE pro S basic unit
Tightening torque
•
Connection cross sections
•
- Solid
- Finely stranded with end sleeve
- PROFIBUS cable
1)
Note
Bus termination module
The bus termination module is powered by a voltage of max. 5 V.
The current drawn for the bus termination module is limited.
336
TORQUE: 5.2 lb.in to 7.0 lb.in
0.6 Nm to 0.8 Nm
2 x 0.5 mm ... 1.5 mm ; 1 x 0.5 mm
2 2
2 x AWG 20 to 16 / 1 x AWG 20 to 14
2 x 0.5 mm ... 1.0 mm ; 1 x 0.5 mm
2 2
2 x 0.34 mm / 1 x 0.34 mm
2
AWG 22
System Manual, 05/2019, A5E40507475002A/RS-AD/004
... 2.5 mm
2 2
... 2.5 mm
2 2
2
SIMOCODE pro