Warranty; More Information - Siemens SIMOCODE pro C System Manual

14.2.6

Warranty

Note
To meet the conditions of the warranty, you must observe the safety and commissioning
information from the operating instructions.
You can find the Operating Instructions for SIMOCODE pro listed in Chapter General
information on installation and commissioning (Page 318) or at Operating Instructions
(https://support.industry.siemens.com/cs/ww/en/ps/16027/man) in the Industry
Online Support.
14.2.7

More information

You will find further information on the Internet:
● Internet (https://www.siemens.com/simocode)
● Information and Download Center (https://www.siemens.com/sirius/infomaterial)
● Product Information System (ProdIS)
(https://support.industry.siemens.com/My/ww/en/requests)
● Service and Support (https://support.industry.siemens.com/cs/ww/en/ps)
● ATEX (https://www.siemens.com/sirius/atex)
● Certificates (https://support.industry.siemens.com/cs/ww/en/ps/16027/cert)
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
14.2 Dry-running protection for centrifugal pumps by active power monitoring
Safety and commissioning information for Ex areas
327