Siemens SIMOCODE pro C System Manual page 241

Sequence for connecting cables to the system interface
Proceed as follows:
Table 12- 25 Connecting to the system interface
Figure 12-36 Sequence for connecting cables to the system interfaces
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Mounting, wiring, connecting, system interfaces, configuration guidelines
Step Description
1 Place the plug in the plug shaft, keeping it is as straight as possible. Ensure the locking
mechanisms of the connector slot audibly snap onto the connector enclosure.
2 System interfaces not in use can be closed using the system interface cover.
12.3 System interfaces
241