Siemens SIMOCODE pro C System Manual page 400

Index
Communication, 42, 109
Communication on PROFIBUS / Modbus, operator
panel with display, 100
Communication on PROFINET/EtherNet/IP, operator
panel with display, 101
Communication parameters, 267
Communication through PROFIBUS, 43
Communication via EtherNet/IP, 45
Communication via Modbus, 45
Communication via PROFINET, 44
Compartment identification, 159
Conductor cross sections, 197
Conductor cross sections, stripped lengths, and
tightening torques of the cables
for the basic units SIMOCODE pro C and
pro V, 197
for the SIMOCODE pro S basic unit, 198
Conductor cross sections, stripped lengths, and
tightening torques of the cables of the 1st generation
current / voltage measuring modules, 232
Conductor cross-sections, stripped lengths, tightening
torques of conductors of the 2nd generation 120 mm
and 145 mm current / voltage measuring modules, 231
Conductor cross-sections, stripped lengths, tightening
torques of conductors of the 2nd generation 45 mm
and 55 mm current / voltage measuring modules, 231
Configuration error, 291
Configuration information for using an operator panel
with display and/or a decoupling module, 155
Configuration instructions for the use of fail-safe
expansion modules, 157
Connecting a PC to the
SIMOCODE pro V Modbus RTU basic unit, 265
Connecting cable, 76, 176, 236, 331
Connecting cables to the system interface of the
operator panel, 245
Connecting cables to the system interface of the
operator panel with display, 246
Connecting Modbus RTU to the
SIMOCODE pro V Modbus basic unit, 250
Connecting Modbus RTU to the
SIMOCODE pro V Modbus basic unit via the device
terminals, 250
Connecting Modbus RTU to the
SIMOCODE pro V Modbus basic unit via the sub-D
connector, 250
Connecting the ETHERNET cable to the basic
unit pro V, 249
Connecting the Y connecting cable to the basic unit
and to the current measuring module or to the current /
voltage measuring module, 169
Connection conductor basic unit, 339
400
Connection conductor SIMOCODE pro S basic
unit, 336
Connection conductors analog module, 353
Connection conductors digital modules, 347
Connection conductors digital modules DM-F, 348
Connection conductors for voltage measurement
current measuring modules / current/voltage measuring
modules, 342, 344
Connection conductors ground-fault module, 354, 355
Connection conductors multifunction module, 359
Connection conductors SIMOCODE pro C / pro V basic
units, 335
Connection conductors temperature module, 356
Connection cross sections decoupling module, 345
Connection example for "DM-F Local with cross-circuit
detection, 2 NCs, 2 channels, monitored start", 224
Connection example for multifunction module, 213
Connection examples fail-safe digital module
DM-F, 225
Connection examples for
SIMOCODE pro V PN / pro V EIP basic units, 209
Connection examples of SIMOCODE pro C/V/S basic
units, 207
Connection of connecting cables to the system
interface, 241
Contacting of the initialization module, 163
Control circuit digital modules, 346
Control circuit ground-fault module, 354, 355
Control circuit multifunction module, 357
Control circuit of the analog module, 352
Control functions, 61
Control of a soft starter, 83
Cos phi, 135
Cos phi limits, 124
Cos phi monitoring, 41, 50
Counters, 58
Cover, 85
Current / voltage measuring modules, 136, 229
Current limit monitoring, 41, 49
Current limits, 124
Current measuring modules, 69
Current notes on operational safety, 17
Current settings, 124
Current/voltage measuring module, 27
Current/voltage measuring modules, 70, 71
Cyclic services, 54
D
Dahlander reversing starter, 42
Dahlander starter, 42, 53, 83
Deactivation of the compartment identification, 164
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro