Siemens SIMOCODE pro C System Manual page 387

Motor stop time monitoring
SIMOCODE pro can monitor the stop times of a motor to avoid plant downtimes due to failed
motors caused by either running too long (wearing out) or being stopped for too long.
Multifunction module
Universal module of the SIMOCODE pro S device series with the following functions:
● Digital module function with four digital inputs and two monostable relay outputs
● Ground fault module function with the possibility of implementing powerful external
ground-fault monitoring in conjunction with the 3UL23 residual-current transformer
● Temperature module function with one input for connecting an analog PT100, PT1000,
KTY83, KTY84 or NTC temperature sensor.
Network Time Protocol
Implementation of a TCP/IP protocol for time synchronization in networks. The NTP
procedure uses hierarchical time synchronization, that is, an external clock (e.g.
SICLOCK TM or a PC in the network) is used for synchronization.
Octet
Sequence of bytes. Octet n: string of n bytes.
Offset
A reference within an address table.
OPC Unified Architecture (UA)
OPC Unified Architecture (UA) is the next generation technology of the OPC Foundation for
secure and reliable data transfer and defines access to industrial communication networks.
OPC UA client
An OPC UA client is a user program that accesses process data via the OPC UA interface.
Access to the process data is made possible by the OPC UA server.
OPC UA server
The OPC server provides the OPC client with a wide range of functions with which it can
communicate via industrial networks. SIMOCODE pro V PN provides extensive process data
via OPC UA.
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Glossary
387