Siemens SIMOCODE pro C System Manual page 344

Technical data
15.4 Technical data of the current measuring modules and the current / voltage measuring modules
Technical data of the current measuring modules or the 1st generation current / voltage measuring modules
Connection for voltage measurement
Tightening torque
•
Connection cross sections
•
- Solid
- Finely stranded with end sleeve
1) for 3UF7103 or 3UF7104 to 1000 V
2) for 3UF7103 or 3UF7104 to 8 kV
3) You will find more information at SIMOCODE pro (https://www.siemens.com/simocode) and in Chapter Short-circuit
protection with fuses for motor feeders for short-circuit currents up to 100 kA and 690 V for 1st generation current / voltage
measuring module (Page 364)
4) Screw connection is possible with an appropriate 3RT19 box terminal.
5) When connecting cable lugs complying with DIN 46235 to cables with a cross section larger than 95 mm
3RT19 56-4EA1 terminal cover is required to maintain phase separation.
6) When connecting cable lugs complying with DIN 46234 to cables with a cross section larger than 240 mm
connecting cable lugs complying with DIN 46235 to cables with a cross section larger than 185 mm
terminal cover is required to maintain phase separation.
7) Valid for float values
8) A current range of 0.4 - 8 A is necessary for the 3UF7110-1AA01-0 version
344
TORQUE: 7 lb.in - 10.3 lb.in
0.8 Nm to 1.2 Nm
1 x 0.5 mm - 4 mm / 1 x AWG 20 to 12
2 2
2 x 0.5 mm - 2.5 mm / 2 x AWG 20 to 14
2 2
1 x 0.5 mm - 2.5 mm / 1 x AWG 20 to 14
2 2
2 x 0.5 mm - 1.5 mm / 2 x AWG 20 to 16
2 2
System Manual, 05/2019, A5E40507475002A/RS-AD/004
, the
2
and when
2
, the 3RT19 56-4EA1
2
SIMOCODE pro