13.2.2.3
Setting the time manually after switch-on or recovery of the supply voltage
Setting the time with SIMOCODE ES (TIA Portal)
If the internal realtime clock of the devices is not automatically synchronized via NTP, you
can make the setting manually with SIMOCODE ES.
To do so, follow these steps:
Set the time manually after switch-on or recovery of the supply voltage
Step
1
2
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Description
Go online, e.g. via "Online & Diagnostics" → Accessible devices
In the project navigator, double-click "Commissioning".
•
Click on "Command"
•
Choose "Set time (=PC time in UTC)
•
Commissioning, service, troubleshooting
13.2 Commissioning
263
Need help?
Do you have a question about the SIMOCODE pro C and is the answer not in the manual?