Configuring The Ip Address - Interlogix NS4750-24S-4T-4X-V2 Command Manual

After logging in with the default user name and password, a new user name and
password must be configured.
newusername
Command:
newusername <username> password <password>
username Establish a new User Name Authentication
<username> New User name allows letters, numbers and underscores except
admin
password Specify the password for the user
<password > The new password is required at least 8 characters and must be
Default:
N/A
Usage Guide:
To change user name and password when logging with default account(admin).
Example:
To change user name and password.
Switch# newusername abc password 123aAb~!
The user can now enter commands to manage the managed switch. For a detailed
description of the commands, refer to the following chapters.
Note: For security purposes, store the new account information ain a safe location.

Configuring the IP address

The managed switch is shipped with default IP address shown below.
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
included
one lowercase letter [a~z], one uppercase letter [A~Z], one
number [0~9], and one special character [~,!,@,#,...,w/o"?"].
Chapter 2: Console CLI management
7