Interlogix NS4750-24S-4T-4X-V2 Command Manual page 34

Chapter 4: Commands for CLI configuration
shutdown Shutdown incoming port. The shutdown feature only works
when the packet length is less than 1518 (without VLAN
tags).
tag-priority Tag priority
vid VID field
Default:
N/A
Usage Guide:
To update the specific profile for the access list.
Example:
Original:
Profile 1 (action: permit, dmac-type: unicast, frametype: ipv4-icmp, ingress: any,
logging: disable, policy: 1, rate-limiter: 1, tag-priority: 1. vid: 1).
Updated:
Profile 1 (action: deny, dmac-type: any, frametype: ipv4-icmp, ingress: any,
logging: disable, policy: 1, rate-limiter: 1, tag-priority: 1. vid: 1).
Switch# configure terminal
Switch (config)# access-list ace update 1 action deny dmac-type
any
access-list rate-limiter
Command:
access-list rate-limiter <RateLimiterList : 1~16> pps
<PpsRate : 0-131071>
<RateLimiterList : 1~16>
<PpsRate : 0-131071>
Default:
0
Usage Guide:
To set pps rate for specific rate-limiter ID.
Example:
To set pps rate(10000 pps) for specific rate-limiter ID 1.
Switch# configure terminal
Switch (config)# access-list rate-limiter 1 pps 10000
access-list rate-limiter pps
Command:
access-list rate-limiter pps <PpsRate : 0-131071>
<PpsRate : 0-131071>
Default:
32
Rate limiter ID
Rate value
Rate value
NS4750-24S-4T-4X-V2 Managed Switch Command Guide