Interlogix NS4750-24S-4T-4X-V2 Command Manual page 276

Chapter 4: Commands for CLI configuration
- switchRMON (.1.3.6.1.2.1.16.22)
SNMP-FRAMEWORK-MIB :
- snmpEngine (.1.3.6.1.6.3.10.2.1)
SNMP-MPD-MIB :
- dot1dTpHCPortTable (.1.3.6.1.2.1.17.4.5)
- snmpMPDStats (.1.3.6.1.6.3.11.2.1)
SNMP-USER-BASED-SM-MIB :
- usmStats (.1.3.6.1.6.3.15.1.1)
- usmUserTable (.1.3.6.1.6.3.15.1.2)
SNMP-VIEW-BASED-ACM-MIB :
- vacmContextTable (.1.3.6.1.6.3.16.1.1)
- vacmSecurityToGroupTable (.1.3.6.1.6.3.16.1.2)
- vacmAccessTable (.1.3.6.1.6.3.16.1.4)
- vacmMIBViews (.1.3.6.1.6.3.16.1.5)
show snmp mib ifmib ifIndex
Command:
show snmp mib ifmib ifIndex
show Show running system information
snmp Display SNMP configurations
mib MIB(Management Information Base)
ifmib IF-MIB
ifIndex The IfIndex that is defined in IF-MIB
Default:
N/A
Usage Guide:
To display the SNMP MIB ifIndex contexts.
Example:
To display the SNMP MIB ifIndex contexts.
Switch # show snmp mib ifmib ifIndex
ifIndex
----------
1 Switch 1 - Port 1
2 Switch 1 - Port 2
3 Switch 1 - Port 3
4 Switch 1 - Port 4
5 Switch 1 - Port 5
6 Switch 1 - Port 6
7 Switch 1 - Port 7
8 Switch 1 - Port 8
9 Switch 1 - Port 9
10 Switch 1 - Port 10
11 Switch 1 - Port 11
12 Switch 1 - Port 12
13 Switch 1 - Port 13
14 Switch 1 - Port 14
274
ifDescr
-------------------------------------
Interface
---------
GigabitEthernet 1/1
GigabitEthernet 1/2
GigabitEthernet 1/3
GigabitEthernet 1/4
GigabitEthernet 1/5
GigabitEthernet 1/6
GigabitEthernet 1/7
GigabitEthernet 1/8
GigabitEthernet 1/9
GigabitEthernet 1/10
GigabitEthernet 1/11
GigabitEthernet 1/12
GigabitEthernet 1/13
GigabitEthernet 1/14
NS4750-24S-4T-4X-V2 Managed Switch Command Guide