Ping - Interlogix NS4750-24S-4T-4X-V2 Command Manual

Chapter 4: Commands for CLI configuration
no
no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (erps 1 command force port0)
Switch# no erps 1 command force port0

ping

ping ip
Command:
ping ip <v_ip_addr> [ repeat <count> ] [ size <size> ] [ interval
<seconds> ]
ping Send ICMP echo messages
ip IP (ICMP) echo
<v_ip_addr>
interval Specify repeat interval
<Seconds : 0-30>
repeat Specify repeat count
<Count : 1-60>
size Specify datagram size
<Size : 2-1452>
Default:
N/A
Usage Guide:
To run the IPv4 Ping function
Example:
To run the IPv4 Ping (192.168.0.78) function
Switch# ping ip 192.168.0.78
PING server 192.168.0.78, 56 bytes of data.
64 bytes from 192.168.0.78: icmp_seq=0, time=0ms
64 bytes from 192.168.0.78: icmp_seq=1, time=0ms
216
ICMP destination address
0-30; Default is 0
1-60; Default is 5
2-1452; Default is 56 (excluding MAC, IP and ICMP headers)
NS4750-24S-4T-4X-V2 Managed Switch Command Guide