Interlogix NS4750-24S-4T-4X-V2 Command Manual page 50

Chapter 4: Commands for CLI configuration
GigabitEthernet <port_type_list>
* All switches or All ports
GigabitEthernet
10GigabitEthernet
Default:
N/A
Usage Guide:
To enter the interface mode.
Example:
To enter the interface 10GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# interface 10GigabitEthernet 1/2
Switch (config-if) #
access-list action permit
Command:
access-list action permit
action Access list action
Default:
Permit
Usage Guide:
To configure Permit for the ACL action.
Example:
To configure Permit ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action permit
access-list action deny
Command:
access-list action deny
action Access list action
Default:
Deny
Usage Guide:
To configure Deny for the ACL action.
Example:
To configure Deny ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
48
1 Gigabit Ethernet Port
10 Gigabit Ethernet Port
NS4750-24S-4T-4X-V2 Managed Switch Command Guide