Interlogix NS4750-24S-4T-4X-V2 Command Manual page 232

Chapter 4: Commands for CLI configuration
show interface <port_type> <port_type_list> statistics
[ { packets | bytes | errors | discards | filtered | { priority
[ <priority_v_0_to_7> ] } } ] [ { up | down } ]
show Show running system information
interface Interface status and configuration
statistics Display statistics counters
bytes Show byte statistics.
discards Show discard statistics.
down Show ports which are down
errors Show error statistics.
filtered Show filtered statistics.
packets Show packet statistics.
priority Queue number
up Show ports which are up
Default:
N/A
Usage Guide:
To display the port statistics information.
Example:
To display the port statistics information (Byte statistics) for interface
GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 statistics bytes
Interface
---------------------- ------------------ ------------------
GigabitEthernet 1/1
show interface <port_type> <port_type_list> status
Command:
show interface <port_type> <port_type_list> status
show Show running system information
interface Interface status and configuration
status Display status
Default:
N/A
Usage Guide:
To display the port status.
Example:
To display the port status for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 status
Interface
Excessive Link
----------------------
-----
GigabitEthernet 1/1 enabled
230
Rx Octets Tx Octets
0 0
Mode Speed & Duplex Max Frame
------- ---------------
Auto
--------- --------- ---
10056 Discard
NS4750-24S-4T-4X-V2 Managed Switch Command Guide