Enable; Erps - Interlogix NS4750-24S-4T-4X-V2 Command Manual

Chapter 4: Commands for CLI configuration

enable

enable
Command:
enable
enable Turn on privileged commands
Default:
None
Usage Guide:
To enter enable mode
Example:
To enter enable mode
Switch > enable
Switch #

erps

erps
Command:
erps <group> command { force | manual | clear } { port0 |
port1 }
erps Ethernet Ring Protection Switching
1-64 ERPS group number
command Administrative Command
clear Clear command
force Force command
manual Manual command
port0 ERPS Port 0 interface
port1 ERPS Port 1 interface
Default:
None
Usage Guide:
To configure Instance Command of Group
Example:
To configure Instance Command (below table) of Group (1)
Switch # erps 1 command force port0
212 NS4750-24S-4T-4X-V2 Managed Switch Command Guide