Interlogix NS4750-24S-4T-4X-V2 Command Manual page 150

Chapter 4: Commands for CLI configuration
mac address-table static
Command:
mac address-table static <mac_addr> vlan <vlan_id>
interface * | 10GigabitEthernet <port_type_list> |
GigabitEthernet <port_type_list>
mac MAC table entries/configuration
address-table
static Static MAC address
<mac_addr>
vlan VLAN keyword
<vlan_id> VLAN IDs 1-4095
interface Select an interface to configure
* All switches or All ports
GigabitEthernet
10GigabitEthernet
Default:
300
Usage Guide:
To configure Static MAC Address Table
Example:
To configure Static MAC Address Table as below table
Switch# configure terminal
Switch (config)# mac address-table static 00:11:22:33:44:55
vlan 1 interface GigabitEthernet 1/1
mep <Instance> ais
Command:
mep <Instance> ais [ fr1m | fr1s ] [ protect ]
mep Maintenance Entity Point
<Instance> The MEP instance number.
ais Alarm Indication Signal
fr1m Frame rate is 1 f/min.
fr1s Frame rate is 1 f/s.
protect The AIS can be used for protection. At the point of state change three
AIS PDU is transmitted as fast as possible.
Default:
None
Usage Guide:
To configure AIS of MEP
Example:
To configure AIS of MEP 1 as below table
148
MAC table entries/configuration
48 bit MAC address: xx:xx:xx:xx:xx:xx
1 Gigabit Ethernet Port
10 Gigabit Ethernet Port
NS4750-24S-4T-4X-V2 Managed Switch Command Guide