Interlogix NS4750-24S-4T-4X-V2 Command Manual page 171

ntp server <1-5> ip-address { <ipv4_var> | <ipv6_var> |
<name_var> }
ntp Configure NTP
server Configure NTP server
<1-5> index number
<hostname>
<ipv4_ucast>
<ipv6_ucast>
Default:
None
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
port-security
Command:
port-security
port-security
Default:
Disabled
Usage Guide:
To enable the Port Security
Example:
To enable the Port Security
Switch# configure terminal
Switch (config)# port-security
port-security aging
Command:
port-security aging
port-security
aging Enable/disable port security aging
Default:
Disabled
Usage Guide:
To enable the Port Aging
Example:
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
domain name
ipv4 address
ipv6 address
Enable/disable port security globally
Enable/disable port security globally
Chapter 4: Commands for CLI configuration
169