Interlogix NS4750-24S-4T-4X-V2 Command Manual page 145

longitude Longitude parameter
east Setting longitude direction to east.
west Setting longitude direction to west.
<Degrees> Longitude degrees (0.0000-180.0000)
Default:
North, 0
Usage Guide:
To configure longitude direction of LLDP-MED
Example:
To configure longitude direction (east, 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv longitude east 5
lldp med media-vlan-policy
Command:
lldp med media-vlan-policy <Index : 0-31> {guest-voice |
guest-voice-signaling softphone-voice | streaming-video |
video-conferencing | video-signaling | voice | voice-signaling}
{tagged | untagged} <vlan_id> dscp <0-63> l2-priority <0-7>
lldp LLDP configurations.
med Media Endpoint Discovery
media-vlan-policy
<Index : 0-31>
guest-voice
guest-voice-signaling
softphone-voice
streaming-video
video-conferencing
video-signaling
voice
voice-signaling
tagged The policy uses tagged frames.
untagged The policy uses un-tagged frames.
<vlan_id> The VLAN the policy uses tagged frames.
dscp Differentiated Services Code Point.
<0-63> DSCP value 0-63
l2-priority Layer 2 priority.
<0-7> Priority 0-7
Default:
0
Usage Guide:
To configure media-VLAN-policy of LLDP-MED
Example:
To configure media-VLAN-policy as below table of LLDP-MED
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
Use the media-vlan-policy to create a policy, which can be
assigned to an interface.
Policy id for the policy which is created.
Create a guest voice policy.
Create a guest voice signaling policy.
Create a softphone voice policy.
Create a streaming video policy.
Create a video conferencing policy.
Create a video signaling policy.
Create a voice policy.
Create a voice signaling policy.
Chapter 4: Commands for CLI configuration
143