Interlogix NS4750-24S-4T-4X-V2 Command Manual page 249

Switch # show ipmc profile
IPMC Profile is now enabled to start filtering.
Profile: 1 (In VER-INI Mode)
Description: test
show ipmc range
Command:
show ipmc range [ <entry_name> ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
range A range of IPv4/IPv6 multicast addresses for the profile
<EntryName : word16>
Default:
N/A
Usage Guide:
To display the IP Multicast Range.
Example:
To display the IP Multicast Range.
Switch # show ipmc range
Range Name : 1
Start Address: 224.24.24.24
End Address : 224.24.24.25
show ipv6 interface
Command:
show ipv6 interface [ vlan <vlan_list> { brief | statistics } ]
show Show running system information
ipv6 IPv6 configuration commands
vlan VLAN of IPv6 interface
brief Brief summary of IPv6 status and configuration
statistics Traffic statistics
Default:
N/A
Usage Guide:
To display the IPv6 configuration.
Example:
To display the IPv6 configuration.
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
Range entry name
Chapter 4: Commands for CLI configuration
247