Log On To The Console - Interlogix NS4750-24S-4T-4X-V2 Command Manual

Chapter 2: Console CLI management
If required, you can change these settings after you log on. This management method
is often preferred because you can remain connected and monitor the system during
system reboots. Also, certain error messages are sent to the serial port, regardless of
the interface through which the associated action was initiated. A Macintosh or PC
attachment can use any terminal-emulation program for connecting to the terminal
serial port. A workstation attachment under UNIX can use an emulator such as TIP.

Log on to the console

After the terminal is connected to the device, power on the managed switch. "Running
testing procedures" appears in the terminal display. Then, a user name and password
prompt appears. The factory default user name and password are shown as follows
and the login screen appears.
Username: admin
Password: admin
6 NS4750-24S-4T-4X-V2 Managed Switch Command Guide