Interlogix NS4750-24S-4T-4X-V2 Command Manual page 263

show port-security port
Command:
show port-security port [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
port-security port-security
port Show MAC Addresses learned by Port Security
interface Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address
Time
-----------------
-------
<none>
show port-security switch
Command:
show port-security switch [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
port-security port-security
switch Show Port Security status
interface Search by port
Default:
N/A
Usage Guide:
To display the status of Port Security.
Example:
To display the status of Port Security.
Switch # show port-security switch interface GigabitEthernet
1/1
Users:
L = Limit Control
8 = 802.1X
D = DHCP Snooping
V = Voice VLAN
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
VID State Added
---- ---------- -------------------------
Chapter 4: Commands for CLI configuration
Age/Hold
------
261