Interlogix NS4750-24S-4T-4X-V2 Command Manual page 146

Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)# lldp med media-vlan-policy 1 guest-voice
tagged 1 dscp 45 l2-priority 5
lldp reinit
Command:
lldp reinit <1-10>
lldp LLDP configurations.
reinit LLDP tx reinitialization delay in seconds
<1-10> 1-10 seconds.
Default:
2
Usage Guide:
To configure Tx re-initialization delay time of LLDP
Example:
To configure Tx re-initialization delay time (5) of LLDP
Switch# configure terminal
Switch (config)# lldp reinit 5
lldp timer
Command:
lldp timer <5-32768>
lldp LLDP configurations.
timer Sets LLDP TX interval (The time between each LLDP frame transmitted
<5-32768> 5-32768 seconds.
Default:
30
Usage Guide:
To configure Tx interval time of LLDP
Example:
To configure Tx interval time (555) of LLDP
Switch# configure terminal
Switch (config)# lldp timer 555
lldp transmission-delay
Command:
lldp transmission-delay <1-8192>
144
in seconds)
NS4750-24S-4T-4X-V2 Managed Switch Command Guide