Interlogix NS4750-24S-4T-4X-V2 Command Manual page 192

Chapter 4: Commands for CLI configuration
<ipv4_ucast>
<ipv6_ucast>
<UdpPort : 1-65535>
informs Send Inform messages to this host
traps Send Trap messages to this host
Default:
None
Usage Guide:
To configure Trap Host of SNMP
Example:
To configure Trap Host (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host IFS
Switch (config-snmps-host)# host interlogix.com 66 informs
no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (host interlogix.com 66 informs)
Switch# configure terminal
Switch (config)# snmp-server host IFS
Switch (config-snmps-host)# no ip address dhcp
informs
Command:
informs retries <retries> timeout <timeout>
informs Send Inform messages to this host
retries retires inform messages
<Retries : 0-255>
timeout timeout parmater
<Timeout : 0-2147>
Default:
None
Usage Guide:
To configure Trap Inform time of SNMP
190
IP address of SNMP trap host
IP address of SNMP trap host
UDP port of the trap messages
retires times
timeout interval
NS4750-24S-4T-4X-V2 Managed Switch Command Guide