Interlogix NS4750-24S-4T-4X-V2 Command Manual page 254

Chapter 4: Commands for CLI configuration
Sent: 3 Packets
show lacp
Command:
show lacp { internal | statistics | system-id | neighbour }
show Show running system information
lacp LACP configuration/status
internal Internal LACP configuration
neighbour Neighbour LACP status
statistics Internal LACP statistics
system-id LACP system id
Default:
N/A
Usage Guide:
To display the LACP mode information.
Example:
To display the LACP mode information.
Switch # show lacp internal
Port
--------------------
Gi 1/1
Gi 1/2
Gi 1/3
show line
Command:
show line [ alive ]
show Show running system information
line TTY line information
alive Display information about alive lines
Default:
N/A
Usage Guide:
To display the VTY information.
Example:
To display the VTY information.
Switch # show line alive
Line is con 0.
* You are at this line now.
Alive from Console.
Default privileged level is 2.
252
Mode Key Role
-------- ---- ------ -------
Enabled Auto Active Fast
Enabled Auto Active Fast
Disabled Auto Active Fast
Timeout Priority
--------
32768
32768
32768
NS4750-24S-4T-4X-V2 Managed Switch Command Guide