Interlogix NS4750-24S-4T-4X-V2 Command Manual page 273

Group Name
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : default_view
SNMPv3 Views Table:
View Name : default_view
OID Subtree : .1
View Type : included
show snmp access
Command:
show snmp access [ <group_name> { v1 | v2c | v3 | any }
{ auth | noauth | priv } ]
show Show running system information
snmp Display SNMP configurations
access access configuration
<GroupName : word32>
any any security model
v1 v1 security model
v2c v2c security model
v3 v3 security model
auth authNoPriv Security Level
noauth noAuthNoPriv Security Level
priv authPriv Security Level
Default:
N/A
Usage Guide:
To display the SNMP Access information.
Example:
To display the SNMP Access information
Switch # show snmp access
Group Name
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : <no writeview specified>
Group Name
Security Model : any
Security Level : NoAuth, NoPriv
Read View Name : default_view
Write View Name : default_view
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
: default_rw_group
group name
: default_ro_group
: default_rw_group
Chapter 4: Commands for CLI configuration
271