Interlogix NS4750-24S-4T-4X-V2 Command Manual page 147

lldp LLDP configurations.
transmission-delay
<1-8192> 1-8192 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88
logging host
Command:
logging host <hostname> | <ipv4_ucast>
logging Syslog
host host
<hostname>
<ipv4_ucast>
Default:
0
Usage Guide:
To configure address of log server
Example:
To configure address of log server
Switch# configure terminal
Switch (config)# logging host 192.168.5.5
logging level
Command:
logging level error | info | warning
logging Syslog
level level
error Error
info Information
warning Warning
Default:
Info
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
Sets LLDP transmision-delay. LLDP transmission delay
(the amount of time that the transmission of LLDP frames
will delayed after LLDP configuration has changed) in
seconds.)
Domain name of the log server
IP address of the log server
Chapter 4: Commands for CLI configuration
145