Interlogix NS4750-24S-4T-4X-V2 Command Manual page 62

Chapter 4: Commands for CLI configuration
ipv6 mld snooping filter
Command:
ipv6 mld snooping filter <ProfileName : word16>
filter Access control on MLD multicast group registration
<ProfileName : word16>
Default:
N/A
Usage Guide:
To apply the MLD Snooping filter ID for specific interface
Example:
To apply the MLD Snooping filter ID 1 for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ipv6 mld snooping filter 1
ipv6 mld snooping immediate-leave
Command:
ipv6 mld snooping immediate-leave
Default:
Disabled
Usage Guide:
To enable MLD Snooping Immediate-leave (Fast Leave) for specific interface
Example:
To enable MLD Snooping Immediate-leave (Fast Leave) for GigabitEthernet
X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ipv6 mld snooping immediate-leave
ipv6 mld snooping max-groups
Command:
ipv6 mld snooping max-groups <Throttling : 1-10>
max-groups
<Throttling : 1-10>
Default:
Unlimited
Usage Guide:
To limit maximum number of MLD group for specific interface
Example:
To limit 5 groups of MLD for GigabitEthernet X/X
60
Profile name in 16 words
IGMP group throttling configuration
Maximum number of IGMP group registration
NS4750-24S-4T-4X-V2 Managed Switch Command Guide