Interlogix NS4750-24S-4T-4X-V2 Command Manual page 262

Chapter 4: Commands for CLI configuration
show platform phy id
Command:
show platform phy id [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
id id
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY ID.
Example:
To display the PHY ID for GigabitEthernet 1/1.
Switch # show platform phy id interface GigabitEthernet 1/1
Port Channel
---- -------
1 0
show platform phy status
Command:
show platform phy status [ interface ( <port_type>
[ <v_port_type_list> ] ) ]
show Show running system information
platform Platform specific information
phy PHYs' information
status status
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY status.
Example:
To display the PHY status.
Switch # show platform phy status interface GigabitEthernet
1/1
Port Issues seen during 1G PHY warmstart Issues during 10G
PHY WS
---- -----------------------------------
1
260
API Base Phy Id
-------- -------
0 (1g) 8634
No
Phy Rev.
------
0
------------------------
No
NS4750-24S-4T-4X-V2 Managed Switch Command Guide