Interlogix NS4750-24S-4T-4X-V2 Command Manual page 201

transport email authentication
Command:
transport email authentication username <username>
password <password>
transport Enable or disable transport email function.
email Enable or disable transport email function.
authentication
<Username>
<Password>
Default:
N/A
Usage Guide:
To configure SMTP authentication's username and password
Example:
To configure SMTP authentication's username (123@interlogix.com) and password
(456)
Switch# configure terminal
Switch (config)# transport email authentication username
123@interlogix.com password 456
transport email from
Command:
transport email from <mail_addr> subject <title>
transport Enable or disable transport email function.
email Enable or disable transport email function.
from sender's email address
<mail_addr>
subject subject/title of the email
<title> email title
Default:
N/A
Usage Guide:
To configure SMTP sender's email address and title of the email
Example:
To configure SMTP sender's email address (sys@interlogix.com) and title of the
email (syserror)
Switch# configure terminal
Switch (config)# transport email from sys@interlogix.com
subject syserror
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
configure SMTP authentication's username and password
User name allows letters, numbers and underscores
The ENCRYPTED (hidden) user password. Notice the
ENCRYPTED password will be decoded by system internally.
You cannot directly use it as same as the Plain Text and it is not
human-readable text normally.
mail address
Chapter 4: Commands for CLI configuration
199