Interlogix NS4750-24S-4T-4X-V2 Command Manual page 143

Switch# configure terminal
Switch (config)# lldp med datum nad83-mllw
lldp med fast
Command:
lldp med fast <1-10>
lldp LLDP configurations.
med Media Endpoint Discovery
fast Number of times to repeat LLDP frame transmission at fast start.
Default:
4
Usage Guide:
To configure frame transmission time of LLDP
Example:
To configure frame transmission time (6) of LLDP
Switch# configure terminal
Switch (config)# lldp med fast 6
lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors <Meters or floors>] |
[meters <Meters or floors>]
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv
altitude Altitude parameter
floors Specify the altitude in floor.
<Meters or floors> Altitude value.
meters Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
lldp med location-tlv elin-addr
Command:
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
LLDP-MED Location Type Length Value parameter
Chapter 4: Commands for CLI configuration
141