Interlogix NS4750-24S-4T-4X-V2 Command Manual page 138

Chapter 4: Commands for CLI configuration
Default:
None
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#end
Switch#
exec-banner
Command:
exec-banner
exec-banner Enable the display of the EXEC banner
Default:
Enabled
Usage Guide:
To enable the display of the EXEC banner
Example:
To enable the display of the EXEC banner
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-banner
exec-timeout
Command:
exec-timeout <0-1440>
exec-timeout Set the EXEC timeout
<0-1440> Timeout in minutes
Default:
N/A
Usage Guide:
To configure EXEC timeout
Example:
To configure EXEC timeout (10 minutes)
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exec-timeout 10
136 NS4750-24S-4T-4X-V2 Managed Switch Command Guide