Interlogix NS4750-24S-4T-4X-V2 Command Manual page 160

Chapter 4: Commands for CLI configuration
mep <Instance> meg-id <megid> { itu | itu-cc | { ieee [ name
<name> ] } }
mep Maintenance Entity Point
<Instance> The MEP instance number.
meg-id The ITU/IEEE MEG-ID
<Megid : word>
ieee The MEG-ID (Short MA Name) has IEEE Character String format. The meg-id
max. is 16 characters.
itu The MEG-ID has ITU format (ICC - UMC). The meg-id max. is 13 characters.
itu-cc The MEG-ID has ITU Country Code format (CC - ICC - UMC). The meg-id
max. is 15 characters
name Only relevant for IEEE. The MAID is with Maintenance Domain Name
<Name : word>
Default:
Usage Guide:
To configure MEG-ID of MEP.
Example:
To configure MEG-ID of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 meg-id ICC000MEG0000 ieee name
interlogix.com
mep <Instance> mep-id
Command:
mep <Instance> mep-id <mepid>
mep Maintenance Entity Point
<Instance> The MEP instance number.
mep-id The MEP-ID
<Mepid : uint>
Default:
None
Usage Guide:
To configure MEP-ID of MEP.
Example:
To configure MEP-ID (5) of MEP 1.
158
The MEG-ID string. This is either the ITU MEG-ID or the IEEE
Short MA, depending on the selected MEG-ID format. The
ITU max. is 13 characters. The ITU-CC max. is 15
characters. The IEEE max. is 16 characters..
Maintenance Domain Name string. The max is 16 characters
The MEP-ID value.
NS4750-24S-4T-4X-V2 Managed Switch Command Guide