Interlogix NS4750-24S-4T-4X-V2 Command Manual page 130

Chapter 4: Commands for CLI configuration
To enable IPMC profile
Example:
To enable IPMC profile
Switch# configure terminal
Switch (config)# ipmc profile
ipmc profile <word16>
Command:
ipmc profile <word16>
ipmc IPv4/IPv6 multicast configuration
profile IPMC profile configuration
<word16> Profile name
Default:
Disabled
Usage Guide:
To enter IPMC profile mode
Example:
To enter IPMC profile mode (IFS)
Switch# configure terminal
Switch (config)# ipmc profile IFS
Switch (config-ipmc-profile)#
default range
Command:
default range <EntryName : word16>
default Set a command to its defaults
range A range of IPv4/IPv6 multicast addresses for the profile
<EntryName : word16>
Default:
None
Usage Guide:
To default IPMC Profile Rule for specific IPMC Profile
Example:
To default IPMC Profile Rule (Entry 1) for specific IPMC Profile (IFS)
Switch# configure terminal
Switch (config)# ipmc profile IFS
Switch (config-ipmc-profile)# default range 1
description
Command:
description <ProfileDesc : line64>
128
Range entry name
NS4750-24S-4T-4X-V2 Managed Switch Command Guide