Interlogix NS4750-24S-4T-4X-V2 Command Manual page 134

Chapter 4: Commands for CLI configuration
ipv6 mld snooping
Command:
ipv6 mld snooping
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
Default:
Disabled
Usage Guide:
To enable MLD Snooping.
Example:
To enable MLD Snooping.
Switch# configure terminal
Switch (config)# ipv6 mld snooping
ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan <vlan_list>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
vlan MLD VLAN
<vlan_list> VLAN identifier(s): VID
Default:
Disabled
Usage Guide:
To enable MLD Snooping for specific VLAN.
Example:
To enable MLD Snooping for VLAN 1.
Switch# configure terminal
Switch (config)# ipv6 mld snooping vlan 1
ipv6 mld ssm-range
Command:
ipv6 mld ssm-range <ipv6_mcast> <Ipv6PrefixLength : 8-128>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
ssm-range IPv6 address range of Source Specific Multicast
<ipv6_mcast>
<Ipv6PrefixLength : 8-128>
132
Valid IPv6 multicast address
Prefix length ranges from 8 to 128
NS4750-24S-4T-4X-V2 Managed Switch Command Guide