Interlogix NS4750-24S-4T-4X-V2 Command Manual page 140

Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# history size 1
length
Command:
length <0 or 3-512>
length Set number of lines on a screen
<0 or 3-512>
Default:
None
Usage Guide:
To configure displayed lines on a screen.
Example:
To configure displayed lines on a screen.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# length 10
location
Command:
location <LINE>
location Enter terminal location description
<LINE> One text line describing the terminal's location
Default:
None
Usage Guide:
To configure description of location.
Example:
To configure description (taiwan) of location.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# location taiwan
motd-banner
Command:
motd-banner
motd-banner
Default:
Enabled
Usage Guide:
To enable MOTD banner.
138
Number of lines on screen (0 for no pausing)
Enable the display of the MOTD banner
NS4750-24S-4T-4X-V2 Managed Switch Command Guide