Regulation Switches; Two-Line Display; Soft Keys; Modify Knob - Advanced Energy MDX II User Manual

Regulation Switches

Use these switches to select the method of output regulation when the control panel has
control.
POWER
VOLTAGE
CURRENT

Two-Line Display

When you first power up, the top line of the two-line display shows the actual output level in
volts, amperes, and kilowatts. The bottom line displays the message "Timers Active" if one or
more ramp\run steps have been programmed (see page 6-6). If "Setpoint = nn.nn" is displayed,
you can enter a setpoint directly.
Use the two-line display to view menu selections, parameters, and messages.

Soft Keys

Use the soft keys to select whichever menu functions are shown immediately above them on
the two-line display. Chapter 5 provides an operational overview of all the MDXII functions.
"Control Panel Controls" on page 6-3 explains how to perform these operations from the
MDXII control panel.

Modify Knob

Use the MODIFY knob with the soft keys to make selections and modify values that appear
on the two-line display.

CONTROL PANEL CONTROLS

The first screen that appears when you power up is referred to as the "output display screen."
You can access a broad array of features and settings easily, using the menu choices that
appear on the two-line display.
5700262-P
Specifies that the method of output regulation is power
Specifies that the method of output regulation is voltage
Specifies that the method of output regulation is current
0 Volts 0.00
Amps
Int Setpoint = 0.000 kW
Panel Connection, Controls and Indicators
MDXII Power Supplies
0.00 kW
6-3