Specifying Serial Port Timeout Value; Using The Halo Feature; Using The Contactor Hold Feature - Advanced Energy MDX II User Manual

SPECIFYING SERIAL PORT TIMEOUT VALUE

See "Selecting the Correct Tap" on page 5-8 for a description of this function.
⇒
MORE CONFIG
1. At the top-level menu, press the MORE soft key.
2. Press the CONFIG soft key.
3. Press the HPTOV soft key.
4. Use the MODIFY knob to adjust the timeout value (20 ms to 5 s in 10 ms increments).
5. Press the ENTER soft key; you are returned to the output display screen automatically.

USING THE HALO FEATURE

See "HALO" on page 5-19 for a description of this function.
⇒
MORE OPTIONS
1. At the top-level menu, press the MORE soft key.
2. Press the OPTIONS soft key.
3. Press the HALO soft key.
4. Turn the MODIFY knob to select YES or NO.
5. Press the ENTER soft key; you are returned to the output display screen automatically.

USING THE CONTACTOR HOLD FEATURE

See "Contactor Hold" on page 5-20 for a description of this feature.
⇒
MORE OPTIONS
To help prolong the life of the main and soft-start contactors, follow these steps:
1. At the top-level menu, press the MORE soft key.
2. Press the OPTIONS soft key.
3. Press the C HOLD soft key.
4. Turn the MODIFY knob to select YES or NO.
5. Press the ENTER soft key; you are returned to the output display screen automatically.
5700262-P
⇒
HPTOV
⇒
HALO
⇒
C Hold
Panel Connection, Controls and Indicators
MDXII Power Supplies
6-15