Standards; Conditions Of Use - Advanced Energy MDX II User Manual

Standards

If your MDXII unit bears the "CE" mark:
• The device has been tested for and complies with the following Safety and EMC
standard(s):
– VDE 0160
– EN 50082-2
– EN 55011 (Class A, Group 2)(CISPR 11)
Your MDXII unit must be installed and used only in compliance with the standards listed in
addition to VDE 0113, EN 60204 (IEC 204), and applicable requirements.
For more information, refer to the letter of conformance (US) or declaration of conformity
(EU) accompanying the product.

Conditions of Use

WARNING:
Operating and maintenance personnel must receive proper training before installing,
troubleshooting, or maintaining high-energy electrical equipment. Potentially lethal
voltages could cause death, serious personal injury, or damage to the equipment.
Ensure that all appropriate safety precautions are taken.
CAUTION:
To maintain compliance with the standards listed, your unit requires the addition of a
protective earth ground conductor on the rear panel and the use of shielded input and
output power cables.
5700262-R Introduction
MDXII Power Supplies
1-5