Positive Output - Advanced Energy MDX II User Manual

POSITIVE OUTPUT

For special applications that require a positive output voltage (positive with respect to ground),
follow these steps:
1. Connect the unit's positive terminal on the output connector to the load.
2. Connect the negative terminal on the unit's output connector to the load's common or
ground.
3. Use the ground terminal on the unit's output connector to terminate only the output cable's
shield.
CAUTION:
Neither the terminal nor the outer shield of the output cable should carry load current.
Do not use the unit's ground terminal as a system ground. Do not connect a current-
carrying conductor to the terminal, even if the conductor is a shield element of the
cable.
5700262-R Installation
MDXII Power Supplies
4-13