Advanced Energy MDX II User Manual page 169

Table 7-9. AE Bus and Profibus Communications Commands (Continued)
Command Used By
AE
√
169
request
power,
voltage,
current
limits
√
170
request
maximum
power,
voltage,
current
√
171
request arc
delay
5700262-R
Description
Pro
Requests programmed limits
for output power, voltage,
and current
Bytes 1 and 2 = power
limit
Bytes 3 and 4 = voltage
limit
Bytes 5 and 6 = current
limit
Refer to Command 165, 166,
and 167 for format of
reported output limits.
Requests maximum output
power, voltage, and current
levels that can be requested
for the present tap setting
Bytes 1 and 2 =
maximum power
Bytes 3 and 4 =
maximum voltage
Bytes 5 and 6 =
maximum current)
Refer to Command 165, 166,
and 167 for format of
reported maximum levels.
√
Requests length of time the
output will remain off after
an arc has been sensed (set
with Command 8); returning
packet will indicate value in
ms (no decimal place
implied).
Serial Port Connection, Controls and Indicators
MDXII Power Supplies
Host Data ResponseData
Bytes Bytes
AE Pro AE
0 n/a 6
0 n/a 6
0 0 2
Pro
n/a
n/a
2
7-49