Other Connections; Disconnecting - Advanced Energy MDX II User Manual

®
Advanced Energy

OTHER CONNECTIONS

Connections for an active remote panel, User port, and serial port are explained in other
chapters.
• See page 6-1 to connect an active remote panel.
• See page 9-1 to connect the User port.
• See page 7-1 to connect the serial port.

DISCONNECTING

DANGER:
Internal components may remain live for 1 min after the MDXII unit has been
disconnected. The rear panel may become too hot to touch when the MDXII unit is
producing output power. Wait for a few minutes after the output has been turned off
before you attempt to disconnect any cables.
Disconnect the MDXII unit from all voltage sources and wait a few minutes before
disconnecting cables for any adjustment, replacement, maintenance, or repair.
4-16 Installation 5700262-R