Advanced Energy MDX II User Manual page 105

To reset the lock code, follow these steps:
1. At the top-level menu, press the MORE soft key.
2. Press the CONFIG soft key.
3. Press the LOCK soft key.
4. Press the SET CODE soft key.
5. Use the soft keys to enter the existing code as instructed.
You are returned to the output display screen if you enter the incorrect code.
6. Use the soft keys to enter a new five-digit code.
7. Re-enter the code as instructed.
Either the message "Code Not Accepted—Mismatch" or "Code Accepted" flashes on the
display, and you are returned to the output display screen.
⇒
MORE CONFIG
To lock the MDXII, follow these steps:
1. At the top-level menu, press the MORE soft key.
2. Press the CONFIG soft key.
3. Press the LOCK soft key.
4. Press the LOCK UNIT soft key.
5. Enter the existing five-digit code as instructed.
If you enter the correct code, the message "Code Accepted" flashes on the display, and
you are returned to the output display menu. The control panel will be locked, but you
can turn the unit off.
If you do not enter the correct code, the message "Code Not Accepted— Mismatch"
flashes on the display, and you are returned to the output display menu. The control panel
will not be locked.
To unlock the MDXII, follow these steps:
1. At the output display screen, press any soft key.
2. Enter the unlock code with the soft keys.
If you enter the correct code, the message "Code Accepted" flashes on the display, and
you are returned to the output display screen. Press any soft key to return to the top-level
menu.
If you do not enter the correct code, the message "Code Not Accepted— Mismatch"
flashes on the display, and you are returned to the output display screen. You can request
the correct code from the serial port interface using Command 193.
5700262-P
⇒ ⇒
LOCK LOCKUNIT
Panel Connection, Controls and Indicators
MDXII Power Supplies
6-13