Setting Out-Of-Setpoint Time; Using Target Functions; Specifying An Active Target; Seeing Which Target Is Active - Advanced Energy MDX II User Manual

SETTING OUT-OF-SETPOINT TIME

See "Out-of-Setpoint Timer" on page 5-3 for a description of this function.
⇒
TIMERS OUT-OF-SETPOINT
1. At the top-level menu, press the TIMERS soft key.
2. Press the OUT-OF-SETPOINT soft key.
3. Press either the M (minutes) or S (seconds) soft key and then set the time by turning the
MODIFY knob. Press the other key if you want to set another value.
4. Press the ENTER soft key.
5. Either set an allowable deviation, if desired, or go directly to Step 6 on page 6-9.
(To set an allowable deviation, set the allowable deviation percentage (1 to 99%) by
turning the MODIFY knob.)
6. Press the ENTER soft key; you will be returned to the output display screen automatically.
Note: Press the MODIFY knob at any time to return to the output display screen.

Using Target Functions

See "Target Controls" on page 5-4 for a description of the target functions.

SPECIFYING AN ACTIVE TARGET

⇒
TARGET ACTIVE
1. At the top-level menu, press the TARGET soft key.
2. Press the ACTIVE soft key.
3. Specify a target number (1 through 8) with the MODIFY knob.
4. Press the ENTER soft key; you are returned to the output display screen automatically.

SEEING WHICH TARGET IS ACTIVE

⇒
TARGET ACTIVE
1. At the top-level menu, press the TARGET soft key.
2. Press the ACTIVE soft key.
3. Press the MODIFY knob to be returned to the output display screen.
5700262-P
⇒
Out of Setpt Timer
Panel Connection, Controls and Indicators
MDXII Power Supplies
6-9