Advanced Energy MDX II User Manual page 42

®
Advanced Energy
25 V Voltage Arc
Two Targets, Two
Setpoints
2-22
If this option has been activated at the same time as Varc
Shutdown Enable, you can adjust the Varc trip level(s) from 25
to 400 V, rather than 50 to 400 V. For more information about
trip levels, see "Arc Trip Levels" on page 5-6.
If this option has been activated, you will have access to only
two target setpoints, rather than eight. The MDXII unit recalls
the setpoint from the last run using either of two targets. You can
program different setpoints for the two targets. (This option is no
longer available on new units.)
Product Overview 5700262-R