Table of Contents
Advertisement
Upon completion of the configuration file update, the SMI-S provider restarts to reflect the update.
Upon completion of the restart of the SMI-S provider, the update completion dialog box for Upload
Configuration Files for SMI-S opens.
8. In the update completion dialog box for Upload Configuration Files for SMI-S, click OK. The display
returns to the login dialog box.
In some cases, the Security Alert dialog box regarding the certificate may open before the login
dialog box. If so, click View Certificate to confirm that the certificate is correct and then click Yes.
NOTE: If an error occurs during update of the SMI-S provider configuration file, an error message
displays. Resolve the problem and then run the procedure again, starting with logging in, to update
certificate files for SMI-S.
Installing the report configuration tool
Complete the following instructions to install the report configuration tool.
Prerequisites
You need the following items to install the report configuration tool:
•
A computer running Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows
Server 2016, Red Hat Enterprise Linux AS 5.0, Red Hat Enterprise Linux AS 4.0 on EM64T, Red Hat
Enterprise Linux AS 5.0 on EM64T, Red Hat Enterprise Linux 6, or Red Hat Enterprise Linux 7.
You can use either an IPv4 address or an IPv6 address to connect the SVP to the windows computer.
You can also connect the computer to the SVP over an IPv4 proxy server. When you use the proxy
server, specify a name and a port number of the proxy server as the HTTP_PROXY environment
variable on the Windows computer. For example:SET HTTP_PROXY=http://proxy.xx.co.jp:
8080
•
A user account for exclusive use of the report configuration tool. To use the report configuration tool,
you must create a user account that is used exclusively for the report configuration tool. Assign the
storage administrator role (initial configuration) to this user account.For information on user accounts,
see Creating user accounts on page 53.
•
The report configuration tool installation software. The Report Configuration Tool is located on the
CD-ROM Disc 2, which is named, Host PP.
Installation procedure
To install the report configuration tool:
Procedure
1. Insert the Report Configuration Tool installation CD into the CD-ROM drive.
2. From the media, start the installer.
- For Windows: Navigate to the \program\Config_Report_CLI \Win32 folder, and double-click
setup.EXE.
- For Linux (32 bit): Move to the /program/Config_Report_CLI/ directory, and type ./RIinstsh.
Setting up Remote Web Console
33
Advertisement
Table of Contents
