Table of Contents
Advertisement
Procedure
1. From General Tasks, click Create Configuration Report.
2. Specify a task name, and click Apply. This task name is used as the report name in the Reports
window. This process takes approximately 10 minutes to complete.
3. Click Refresh View to update the Reports window. The created report appears in the list.
Deleting a configuration report
You can delete a report when you no longer need it, or to make room in the Reports window when the
report limit is about to be reached.
Prerequisites
Users that create the report or users with Storage Administrator (Initial Configuration) role can delete a
configuration report.
Procedure
1. In the tree, click Storage Systems > Reports.
2. Specify the report to delete.
3. Click Delete Reports.
4. Click Apply.
Managing tasks
This topic describes tasks and the Tasks window, and provides instructions for managing tasks.
Because Remote Web Console operations are executed in the background, you start the next task
immediately after performing the previous one. You keep track of your tasks' progress is by entering a
task name during each Remote Web Console procedure and then tracking its status and other
information using the Tasks window.
•
Each procedure you perform requires a task name. For example, when you provision or configure the
system, create a pair, or any other procedure, you must assign a name for the task.
•
Each task is queued and then processed by the storage system in the order of its arrival.
Only one task is executed at the same time, except for the following. In the case of the following
operations, the next task may be executed before the current task completes or fails.
•
Create LDEVs
•
Format LDEVs
•
Shred LDEVs
•
Shrink Pool
•
Edit Encryption
Viewing and managing the storage system
93
Advertisement
Table of Contents
